Imtech Design Moldflow Analysis & Polymer Engineering solutions, operate the full suite of Moldflow flow simulation programs and software for injection molding product design advice and are able to analyses the smallest medical device to the largest car instrument panel quickly and efficiently to give you practical solutions to complex injection moulding problems for almost any type of plastic material on the database.

Imtech Design have offices in UK, USA and Australia. For more information Click Here

Imtech Design Ltd was founded to provide our consultancy clients with the most practical polymer solutions and service. Imtech is committed to the client and understanding markets they serve and the injection moulding technology required to help design for success and bring new products to market quickly and efficiently.

Imtech Design are Moldflow Silver Certified Plastic Flow Simulation Consultants and Engineers and are experts in Mpi filling, cooling and warpage analysis. Imtech Design web site provides usefull information on trouble shooting plastics moulds including free mould flow design advice for plastics professionals.

Contact us for a budgetary quote.

Moldflow Plastic Adviser, Plastics Insight, Moldflow Mpi, Mold flow communicator and Mold Adviser are Mould flow software products for simulating the injection molding of plastic materials. Imtech use CAD Connectivity Tools to link structural CAD - CAE to MPI, MPA and MPX Community projects in the plastics and tool making industry.

Moldflow is the registered trademark Moldflow Corporation & Moldflow Europe ltd and Mold flow Plastics Labs as advised in the flow front magazine and trade publications.

There are two basic types of plastic: thermosetting, which cannot be resoftened after being subjected to heat and pressure; and thermoplastic, which can be repeatedly softened and remolded by heat and pressure. When heat and pressure are applied to a thermoplastic binder, the chainlike polymers slide past each other, giving the material “plasticity.” However, when heat and pressure are initially applied to a thermosetting binder, the molecular chains become cross-linked, thus preventing any slippage if heat and pressure are reapplied.

For more plastic injection molding information from Imtech Design Click Here

Thermoplastic materials can be transferred to the steel mold via Hot runners for better solutions inc, hot runner mold hot runner molds hot runner molding hot runner design hot runner mould hot runner parts mhs standard for access

Poly-phenylene Oxide (PPO)

Properties: Rigid, opaque, good dimensional stability at high temperature and humidity conditions, difficult to process (blended to ease injection moulding), tough.

Applications: Coffee pot and washing m/c parts (where high temperature and moisture are critical), replacement for die castings, drink vending machines, microwave components.

Styrene Acrylonitrile (SAN) & Acrylonitrile Styrene Acrylate (ASA)

Properties: Rigid, transparent, tough, resistant to grease, stress cracking and crazing, easily processed, resistant to food stains.

Applications: Drinking tumblers, hi-fi covers, lenses, water jugs and toothbrush handles, kitchen and picnic ware, radio dials, TV set screens, washing machine trims.

Ethylene Vinyl Acetate (EVA)

Properties: Flexible (rubbery), transparent, good low temperature flexibility (-70'C), good chemical resistance, high friction coefficient.

Applications: Teats, handle grips, flexible tubing, record turntable mats, beer tubing, vacuum, cleaner hosing.

The Fiber-orientation flow analysis is used to predict the behavior of composite materials. While injection-molded fiber-reinforced thermoplastics constitute a major commercial application of short-fiber composite (a filler within a polymer matrix) materials, the modeling of the process is more complex than in other flow applications. In injection-molded composites, the fiber alignment (or orientation) distributions show a layered nature, and are affected by the filling speed, the processing conditions and material behavior, plus the fiber aspect ratio and concentration. Without proper consideration of the fiber behavior, there is a tendency to significantly overestimate the orientation levels. The Moldflow fiber orientation model allows significantly improved orientation prediction accuracy over a range of materials and fiber contents.

For more plastic injection molding information from Imtech Design Click Here

Common terms in the plastic simulation field include:- moldflow.com, mold, supply chain management, molding, thermoforming, plastic products, injection molded plastic, plastic moulding, plastic forming, molding supplies, moldflow