Imtech Design Moldflow Analysis & Polymer Engineering solutions, operate the full suite of Moldflow flow simulation programs and software for injection molding product design advice and are able to analyses the smallest medical device to the largest car instrument panel quickly and efficiently to give you practical solutions to complex injection moulding problems for almost any type of plastic material on the database.

Imtech Design have offices in UK, USA and Australia. For more information Click Here

Imtech Design Ltd was founded to provide our consultancy clients with the most practical polymer solutions and service. Imtech is committed to the client and understanding markets they serve and the injection moulding technology required to help design for success and bring new products to market quickly and efficiently.

Imtech Design are Moldflow Silver Certified Plastic Flow Simulation Consultants and Engineers and are experts in Mpi filling, cooling and warpage analysis. Imtech Design web site provides usefull information on trouble shooting plastics moulds including free mould flow design advice for plastics professionals.

Contact us for a budgetary quote.

Moldflow Plastic Adviser, Plastics Insight, Moldflow Mpi, Mold flow communicator and Mold Adviser are Mould flow software products for simulating the injection molding of plastic materials. Imtech use CAD Connectivity Tools to link structural CAD - CAE to MPI, MPA and MPX Community projects in the plastics and tool making industry.

Moldflow is the registered trademark Moldflow Corporation & Moldflow Europe ltd and Mold flow Plastics Labs as advised in the flow front magazine and trade publications.

A plastic is made up principally of a binder together with plasticizers, fillers, pigments, and other additives. The binder gives a plastic its main characteristics and usually its name. Thus, polyvinyl chloride is both the name of a binder and the name of a plastic into which it is made. Binders may be natural materials, e.g., cellulose derivatives, casein, or milk protein, but are more commonly synthetic resins. In either case, the binder materials consist of very long chainlike molecules called polymers. Cellulose derivatives are made from cellulose, a naturally occurring polymer; casein is also a naturally occurring polymer. Synthetic resins are polymerized, or built up, from small simple molecules called monomers. Plasticizers are added to a binder to increase flexibility and toughness. Fillers are added to improve particular properties, e.g., hardness or resistance to shock. Pigments are used to impart various colors. Virtually any desired color or shape and many combinations of the properties of hardness, durability, elasticity, and resistance to heat, cold, and acid can be obtained in a plastic.

For more plastic injection molding information from Imtech Design Click Here

Common generic polymer names include: ABS, ABS GPS HIPS SAN ASA SBS PC PMMA PES PSU PUR FPVC RPVC PP PPO HDPE LDPE PA6 PA66 PA11 PA12 PBT PET POM POM PPS Acrylonitrile Butadiene Styrene Plating High Heat Polystyrene High Impact Polystyrene Styrene Acrylonitrile Acrylate Styrene Acrylonitrile Styrene Butadiene Polycarbonate Polymethyl Methacrylate Acrylic Polyethersulfone Polysulfone Polyurethane Flexible Polyvinyl Chloride Rigid polyvinyl Chloride Polypropylene Polyphenylene Oxide High Density Polyethlene Low Density Polyethlene Nylon 6 Nylon 66 Nylon 11 Nylon 12 Polybutylene Terephthalate Polyethylene Terephthalate Polyoxymethylene Homo Polyoxymethylene Copolymer Polyphenylene Sulphide

Polypropylene (PP)

Properties: Semi-rigid, translucent, good chemical resistance, tough, good fatigue resistance, integral hinge property and good heat resistance.

Applications: Flexible and rigid packaging, automotive Bumpers, cladding, and exterior trim, consumer products, and industrial uses. PP fibre is used in tape and strapping.

Polypropylene (PP)

Properties: Semi-rigid, translucent, good chemical resistance, tough, good fatigue resistance, integral hinge property and good heat resistance.

Applications: Flexible and rigid packaging, automotive Bumpers, cladding, and exterior trim, consumer products, and industrial uses. PP fibre is used in tape and strapping.

Polybutene-1 (PB-1)

Properties: PB-1 is obtained by polymerisation of butene-1, with a stereo-specific Ziegler-Natta catalyst to create a linear, high molecular, isotactic and semi-crystalline polymer.

Applications: A major application area for polybutene resins is seal-peel or easy-open packaging. Typical examples include carton liners (e.g. cereal packaging) and packs for pre-packed delicatessen products like cold meats, cheeses and smoked salmon.

With kind support from IDES.com, we have gathered a collection of 31 Design Guides exclusively dealing with issues facing plastics design professionals. Plastics Design Principles, Designing Ribs, Thermoplastics Composites, Engineering Design Guide, Injection Molding Process Guide, ROI Calculator, Designing Snap Fits Guide

For more plastic injection molding information from Imtech Design Click Here

FEA analysis involves simulation of many aspects of the injection molding process including: moldflow mpi, moldflow mpi, moldflow material files, mold flow, mold flow design, product design help, fea finite element, fea help, fea finite, sink mark, sink mark, cmold, prototype, detroit manufacturing.